XIANUI LED Closet Light, 24-LED Newest Version Rechargeable Motion Sensor Closet Light
- 【 SUPER BRIGHT 】-- 3 Packs of 24 pure white ( 150LM ) & energy saving LEDs, brightness and comfortable to illuminate dark spaces.
- 【 EASY TO INSTALL 】-- Built in strong magnetic, this light can be adsorbed directly on any iron product, OR installed by magnetic strip ( included ), no hard wiring. It’s very easy to install and remove.
- 【 4 CYCLE MODES 】-- MODE 1: Night Mode ( Blue indicator light flash 1s), MODE 2: Day Mode ( RED indicator light flash 1s), MODE 3: Always On Mode ( Red & Blue indicator light will flash 1s ), MODE 4: OFF;
- 【 MOTION & NIGHT SENSOR 】-- With 2 Sensor Modes, it can detect the motion of human in the dark or daytime. Auto-on within 10ft (3m), auto-off after about 20 seconds of no motion detected. Super saving energy!
- 【 APPLICATION & LIFETIME WARRANTY 】-- Ideal for the bedroom, closet, cabinet, workshop, garage, stairwell, hallway, storage room etc. We provide you Lifetime Warranty for FREE. Please feel free to contact us for any product quality issue via email, we will offer you a free replacement after confirmed. Because we have high confidence in our products. Better Light, Better Life!
24-LEDs Closet Light, Make Your Life Brightness, Convenient & Easy
Ideal for the bedroom, closet, cabinet, workshop, garage, stairwell, hallway, storage room etc.
How To Use It
① Night Mode: Long press the switch for 3-5s till the BLUE indicator lights up. In this mode, the light will turn on when detecting movement in DARK enough condition. (Please note: it will not turn on if it is not dark enough or in daytime)
② Day Mode: Single press the switch till the RED indicator lights up. In this mode, the light will turn on as long as it detects human’s movement,not only in dark condition, but also in daytime.
③ Always-on Mode: Single press the switch till RED/BLUE Indicator lights flicker at the same time. In this mode, the light will always on.
ON/OFF: Long press the switch for 3 seconds, the light will enter Night Mode; Long press the switch for 3 seconds again to turn off the light. (LED Indicator will flash 5 times)
- Material: Aluminum+ABS
- LED QTY: 24LEDs
- Sensing Range: 120°, 3m/10ft
- Power: 4W
- Battery: 800mAh
- Operating current: 400-800 mAh
- Lumens: 150LM
- Operating temperature: 0-80°C
- LED Life Time: 50,000 hours
- Charging: RED light
- Charged: BLUE light
- Charging Time: about 2-3 hrs
- 3 x 24-LEDs motion sensor light
- 3 x Adhesive strip with magnetic
- 1 x USB cable
- 1 x Manual
Please do not put two light too close,they will interact with each other in "AUTO" mode.
Lifetime Warranty after confirmed. Please feel free to contact us for any issues, we'll give you a satisfied reply within 24hrs.